nke Ụdị nko kacha mma Liquefied gas cylinders na ụgbọ ala wiil gbara agba agba igwe Manufacturer na Factory |Puhua
  • IMG_0935

Nko ụdị Liquefied gas cylinders na ụgbọ ala mgbawa igwe

Nkọwa dị mkpirikpi:

Hanger na-aga n'ihu na-arụ ọrụ n'elu site na igwe na-agbawa agbawa
N'elu hanger site na ụdị ogbugba ịgbawa igwe ihicha ihe na-agụnye na-aga n'ihu ụdị, steepụ ụdị na mkpokọta yinye ụdị.
Ngwa a na-ahụkarị
• Mwepụ igwe ihe igwe na nha nha yana nchara
• Mwepụ nke burrs na akpịrịkpa
• Mwepụ nke ájá ịkpụzi
• Mmụba nke nhụsianya elu
• Mgbọ peening iwelie ike ike ọgwụgwụ


Nkọwa ngwaahịa

Mkpado ngwaahịa

Vidiyo ngwaahịa

Nkọwa ngwaahịa

1.Mgbawa nkedo nke nkedo, ihe owuwu welded, akụkụ arụrụ arụ na arụrụ arụ, yana akụkụ dị iche iche gbagwojuru anya (gụnyere cylinders, isi iyi), wdg. Iji hichaa elu elu, wepụ ájá nkedo & filings, na-eme ka elu (micro njikwa), roughing elu tupu eserese, wdg.
2.A na-ekobara ihe ndị a na-emezigharị ihe n'otu n'otu ma ọ bụ n'ìgwè n'elu ebe a na-emegharịgharị ma na-ebuga ya na igwe site na ebuga.Ịtụgharị ihe ndị a gwọworo na-enye ọgwụgwọ dị mma nke akụkụ ndị na-adịchaghị eru nke elu ha.A na-echekwa ụlọ igwe ahụ site na rọba na-eguzogide iyi na ZGMn13.
Enwere ike imepụta igwe site n'usoro, nwere nha ahaziri ahazi, ọnụọgụ na ike turbines, ụdị ebufe nghọta, ikike hanga na-atụgharị.Enwere ike rụpụta draịva hoist na trolley dịka onye zụrụ ya chọrọ.

Nkọwa ngwaahịa

Q37 Series Hanger Ụdị Igwe na-agbawa agbawa

Ụdị

 

Max. ịdị ọcha workpiece arọ(kg)

 

 

Nhicha workpiece size(mm)

 

 

Olu na-agbawa agbawa(n'arọ/min)

 

 

Na-ebuli olu(T/h)

 

 

Nkewa olu

(T/h)

 

 

Mkpokọta ike(kw)

 

 

Vikike nke ukwu

(m3/h)

 

Q376

500

Φ600×1200

2×200

24

24

22.5

4000

Q376B

600

Φ700×1200

2×200

24

24

23.5

4000

Q378

800

Φ1000×1600

2×250

30

30

39.65

5000

Q3710

1000

Φ1200×1800

2×250

30

30

47.5

5000

Q3720

2000

Φ1400×2200

3×250

45

45

56.2

9000

Q3730

3000

Φ1600×2300

3×250

45

45

65.45

11000

Q3750

5000

Φ1800×2500

4×250

60

60

85.45

14000

Q37100

10000

Φ3000×3000

5×250

75

75

97.65

16000

Nhọrọ nbudata

SADAD

Puhua n'elu ụgbọ okporo ígwè gbara gbawara igwe nwere ike iji maka a dịgasị iche iche nke ngwa na workpiece shapes na nha.

Njirimara
• Nkà na ụzụ njem dị iche iche
• wiil mgbawa na-arụ ọrụ nke ọma
• Ọtụtụ igwe nha na ọdịiche dị
Ngwa
• Mwepụ igwe ihe igwe na nha nha yana nchara
• Mwepụ nke burrs na akpịrịkpa
• Mwepụ nke ájá ịkpụzi
• Mmụba nke nhụsianya elu
• Mgbọ peening iwelie ike ike ọgwụgwụ
Ngwa na-agụnye mgbawa ihicha ígwè welded, deburring na homogenising diecast akụkụ, na peening dynamically mesiri akụkụ.Enwere ike ịgwọ ogbe nke obere ihe ma ọ bụ otu nnukwu, nnukwu workpieces.

A na-enweta mgbanwe a site na ọtụtụ atụmatụ pụrụ iche:
Wheel gbawara agbawa
Mgbawa wiil na-enye abrasive nke ọma tupu osooso, nke na-enye ohere maka obere oge ọgwụgwọ, elu arụmọrụ na a elu gbawara usoro.
Ntughari na oscillation
Iji nweta mkpuchi zuru ezu, workpiece na-ebu nko na-atụgharị na-akwụsị na-akpaghị aka na atọ akpaka workpiece na-eri nri dị iche iche na kabinet gbawara.Usoro ntụgharị na oscillation a pụtara na ọbụnadị ihe arụrụ arụ dị mgbagwoju anya, nke siri ike iru elu, nwere ike ịgwọ ya nke ọma na nke ọma.
Nko na ibuli nhọrọ
Enwere ike ịhazi usoro njem maka ịdị arọ dị iche iche.Dị ka nhọrọ, ibu nko dị na agbakwunyere yinye hoists maka ịrụ ọrụ mfe na nchekwa.
Atụmatụ na nhọrọ pụrụ iche
Usoro
A na-eji aka na-ebufe ihe ndị a na-arụ ọrụ na nko na-atụgharị ma ọ bụ na-akpaghị aka na sistemụ ụgbọ okporo ígwè dị n'elu n'ime kabinet gbawara agbawa.Usoro mgbawa na-aga dabere na mmemme atọrọ na oge mgbawa.
Igwe ọkọlọtọ
Abrasive ejiri mee ihe na iwu dara na-ada site na nchịkọta abrasive hopper n'okpuru kabinet gbawara wee bufee ya site na ebufe screw gaa na mbuli bọket na ngalaba mgbake abrasive.N'ime ebe a na-emegharị ahụ, a na-ekewapụ abrasive eji eme ihe site na mma na mmetọ wee laghachi na silo abrasive.
Nhọrọ mweghachi abrasive
Maka imeziwanye nchacha abrasive, dịka nkewa nke ọkụ aluminom, enwere ike ịwụnye sieve vibro n'etiti ngalaba mweghachi na silo abrasive.
Nhọrọ maka ngwa nchọta ihe/ọrụ dị arọ
Ihe na-ebufe vibro nwere ike dochie ebufe ịghasa iji weta nchacha/ikewa aja na ihe mmetọ dị arọ site na abrasive eji eme ihe.Ekwesịrị ka etinyere ebufe ya na ihe ndọta ndọta (bụkwa nhọrọ) iji wepụ ájá ka ọ dị ogologo ndụ ọrụ igwe.Abrasive ahụ na-aga na nkesa ikuku dị ka ọ dị na mbụ.
Ihe ntụgharị Vibro
N'ọnọdụ ọkọlọtọ screw ebu, enwere ike iji ebufe vibro bufee abrasive site na kabinet gbawara agbawa na mbuli bọket.Sive arụnyere n'ime ebufe vibro na-ekewapụ ezigbo ego na nke abrasive.Maka iwepụ uzuzu, a na-ejikọta ebufe na nzacha uzuzu nke igwe etiti.
Vibro Sieve
Maka usoro mgbawa na-enweghị nkwụsịtụ, a na-eji igwe vibro sieve ihicha abrasive.A na-eji sieve vibro mgbe ngalaba ntugharị abrasive na sieves ndị na-adịghị ahụkebe, dị ka ọkụ sitere na aluminom diecasting workpieces, site na abrasive ka ha ghara imetụta usoro mgbawa ahụ.A na-etinye sieve n'elu silo.Igwe vibro-moto abụọ na-anya ya ma na-emegharị ya ka ọ dị ka sieve shaker.A na-enweta nhịahụ ezubere iche nke iwu achọghị site na nha ntupu dabara na usoro a.A na-etinye ego nchara na-akpaghị aka n'ime ụlọ akụ.Mpịakọta akụkụ na-enye ohere ịnweta sieve dị mfe maka ịdị mfe na nhazi.
Ihe nkesa magnetik
Ihe ndọta ndọta na-abawanye uru gị site na ibelata iyiri igwe yana ibelata oriri abrasive.A na-ewepụ ịkpụzi na ájá dị na nkedo n'oge usoro mgbawa ahụ.Ka ha na-ebute abrasion dị elu, a ga-ekewapụ ha na abrasive ferro-magnetic ngwa ngwa na nke ọma.A na-eme nke a na magnetik separator.Rollers abụọ nwere oghere ndọta na-agbanwe agbanwe na igbe sieving na-ekewapụta ịkpụzi na isi ájá na mma site na abrasive a na-emegharịgharị, n'ụzọ dị otú a naanị 0.2% nke ịdị arọ ka dị.Nke a na-ebelata iyi na abrasive oriri na-eduga gị uru dị elu.

1 (37)
jpg (3)

  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya